Kawasaki KRX Forum banner
21 - 37 of 37 Posts
I have I think a great idea I am working on

#1 behind the passenger seat I am going to put in the back firewall a mounted fan on a rocker switch that I can cut on and off as needed this will help pull air out of the cab and actually push it past the exhaust

#2 I am also having somebody design and work on milit aluminum vent plates that will go on the side in front of both back tires mounted in the frame our body that will allow air to flow through on the engine side.

Whenever I get any of these done I will post my thoughts and pictures
 
I starting to finally get some of the ordered accessories in and try to deal with this back draft issue that I know I will have the minute I install the very nice windshield that comes in the mud package. The dealer clams the heater kit will help with this. so I took the bait and purchased it hoping to pipe in a fresh air vent and possibly tee into into it from the front fire wall.. lots of options on amazon to do this... also ran onto what I think maybe the best idea and install Can ams provent on the roof. ProVent Roof Module for Maverick X3, Maverick Trail & Maverick Sport | Can-Am and possibly this one in the center of the front firewall Amazon.com: Unique Black Aero Design RV ATV Cycle Truck Cargo Work Trailer Side Air Vents: Automotive
 
I starting to finally get some of the ordered accessories in and try to deal with this back draft issue that I know I will have the minute I install the very nice windshield that comes in the mud package. The dealer clams the heater kit will help with this. so I took the bait and purchased it hoping to pipe in a fresh air vent and possibly tee into into it from the front fire wall.. lots of options on amazon to do this... also ran onto what I think maybe the best idea and install Can ams provent on the roof. ProVent Roof Module for Maverick X3, Maverick Trail & Maverick Sport | Can-Am and possibly this one in the center of the front firewall Amazon.com: Unique Black Aero Design RV ATV Cycle Truck Cargo Work Trailer Side Air Vents: Automotive
Interesting

Good share, if you have some and installed share when you do, I am going to order 2 just to see my thoughts.
 
I am looking at the KRX, need them to introduce a 4 seater but if so it will be high on my list once I return from this deployment. With that being said, has anyone seen a glass flip up windshield yet for the KRX? Preferably with a wiper? I know it is only a matter of time but something similar to what Polaris and Can-Am offer would be perfect. We have a ranch in East Texas and hunt pigs out of our side x sides a lot (hence the need for flip up) but we get a lot of rain so need the wiper as well. My personal experience is that glass is by far the best way to go after having tried both poly and glass. Thankfully Kawasaki is very good about offering both cab enclosures and heaters on their products, for a very reasonable price as well. At least as compared to Polaris.. their stuff is nice but man is it $$$.
 
kawi is to announce new rigs in a few days on the 7th.. we will see. order the accessories at time of sale most will offer a good discount and the packaged accessories bundled are a great savings.. the wiper kit looks like it would work on most any windshield..
 
Interesting

Good share, if you have some and installed share when you do, I am going to order 2 just to see my thoughts.
Sorry for the late reply on this.. just recently installed factory front and rear glass with w/wiper option for the colder weather.. I didn't think there was much back draft with them on but I do have the doors and cab sealed up some may contribute.. If anything did notice air to be kinda at a standstill center of the cab at slower speeds. I installed and gave the Can Am ProVent a try. I like it! its pretty inventive at bringing air in while keeping rain and water out. it even has a removable dust screen and filter.. since it doesn't have a fan it works like a fresh air vent in your car so the faster you go the more air it brings in but did eliminate the cab pressure. I was not able to find a good solution to tee or pipe into the factory heater kit vents.. So far the ProVent seems to do the trick with the factory glass and having the wiper washer option makes it all worth the effort...
1393
1394
 
Just a heads up the soft upper doors from Kawasaki will not work with the flip up window from SuperAtv without heavy modifications fyi.
Sorry this is a bit dated but what 'heavy modifications' did you do? Have the doors held up after modification? We have the flip-up windshield and I really don't want to purchase another windshield if I don't have to.
 
Sorry this is a bit dated but what 'heavy modifications' did you do? Have the doors held up after modification? We have the flip-up windshield and I really don't want to purchase another windshield if I don't have to.
I didn’t use the bar going down the front and zip tied the upper rod to the frame. Like to see what everyone else did to mount them.
 
21 - 37 of 37 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top