Kawasaki KRX Forum banner
1 - 6 of 6 Posts

·
Registered
Joined
·
5 Posts
Discussion Starter · #1 ·
What’s up guys..just bought my KRX used and I’m assuming the guy pulled the winch in to far and now it’s tighter than a nuns cut and I can’t disengage the lock to loosen up any ideas? I’ve tried just taking the whole thing out but wasn’t able to. Any insight would be awesome
 

·
Registered
Joined
·
294 Posts
The brake is good for more than whatever the winch capacity is. Backing up and pulling on the cable should tighten it on the drum and give u some slack when released. Still might have to backup tied off with the winch letting out if it's bound up good.
 

·
Registered
2021 KRX 1000 Blue
Joined
·
265 Posts
I did two things to help prevent that issue. The Warn rubber bumper on the cable and installed a push button switch to lock out the wench with not in use.
 
1 - 6 of 6 Posts
Top