Kawasaki KRX Forum banner
1 - 5 of 5 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter · #1 ·
Hi, I just reached 120 miles on my 2021KRX trail edition and was easily able to change the oil. But I don’t have a socket the correct size to change the transmission oil for the front final drive. Does anyone know what size those caps are?

Thanks!
Mike
 

·
Registered
2021 Blue
Joined
·
164 Posts
Just did mine this morning. Front and rear are 27mm with a torque value of 12.9 ft lb or 154.8 inch pounds.
 
  • Like
Reactions: BobX2

·
Registered
2021 Blue
Joined
·
164 Posts
No problem. This little wonder makes filling them sooooo easy. Screws right onto the quart jug and has a twist on/off feature (the yellow thing) to control flow. Also works for gallon jugs. Almost the best $5 I've spent on a side by side.
 

·
Registered
2014 T2 SE, 2021 KRX 1000 TE
Joined
·
184 Posts
Here is a nice little set that covers a lot of different oil filler plugs and filter housings. They are also 3/8 drive, which is hard to find in sockets that size.

 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top