Kawasaki KRX Forum banner

Tires, Tires, Tires

70K views 201 replies 41 participants last post by  Dew 
#1 · (Edited)
This thread has kind of evolved into a thread about many different tires, so I will sticky it for easy access.

You can buy these BFG KM3 tires from our forum vendor Pro UTV Parts. I bought mine from Craig.
BFGoodrich KM3 Tires from Pro UTV Parts
BFGoodrich Mud Terrain T/A KM3


Stumbled across a deal I couldn't pass up yesterday. 4WheelParts has a sale on their BFG KM3 UTV tires. $180 off a set of four. Not a lot of info out on these tires, but what little I have found has been all good. Figured that since I was going to go to a 32" tire when I replaced the OEM 31" Carnivore (only available through Kawasaki at a HUGE price tag) I would jump at this sale and give them a try. I've never seen one in person, and have no clue if I will like them or not. Only one way to find out... 🤣🤣🤣 Don't need tires yet with only about 135 miles on the Carnivores, but they keep well in the basement. LOL

BFgoodrich introduces KM3 UTV Tires :: BFGoodrich North America Newsroom


158
 
See less See more
1
#3 ·
Agree. From what I've been able to find, the 32 x 15 BFG is about 43 lbs. The Carnivore is around 38 lbs. The extra 5 lbs should be fine. Guys are putting 50 lb 35" tires on these things and seem to be okay.
 
#4 ·
Thats not bad. I am searching for tire I like in a 34" under 45lbs. I wish Carnivore would make it as I like em. I want to run 34-35" tire. A 35" and 17" ground clearance. That would be an awesome Beast! Have looked at Super swamper line but too heavy. 34"/10/15 LTB is a favorite tire.
 
#16 ·
How do they measure up compared to the Carnivores? So many tires fall short of their advertised height. The KM3 is "supposed to" measure in at 31-1/2". I believe that is with the weight of the machine on them. Not sure. Now I'm going to have to go back and see if I can find where I read that. :)
 
#6 ·
I was looking at the QuadBoss tires as a possible future replacement, and then I stumbled across this deal. The price per tire worked out to be very close to the QB so I figured why not try something totally different from anything I had ever run before. If for some reason I'm not happy with them I will try something else. The Maxxis Rampage was also high on my list of possibilities, but it's load rating is pretty well maxed out on the KRX. The load rating for the BFG is double that of the Maxxis. Something to consider with these big, heavy KRX's.
 
#8 ·
I was a huge fan of Bighorns on my atv's until I discovered the Kenda Bearclaw HTR. That pushed BH's to number two on my list. They just lack lateral grip in slippery, snowy conditions. I don't think that a 6 ply tire is enough for today's bigger, heavier side by sides, and the 8 ply HTR's don't come in big enough sizes. I have been very impressed with the Carnivores. Great traction, but very hard to find in stock anywhere. Seems everyone wants 32" Carnivores these days. I don't understand why Kawasaki put the 31" size on these machines.
 
#10 ·
So I got home from work Friday to find this nice set of BFG's waiting for me. Pretty good looking tire and I think they should perform pretty good here in the rocky mountains.
However, there is one major problem with them and they must go back. They sent me the wrong damn set. LOL Rolled one up next to the KRX and was disappointed that they were barely as tall as the 31" Carnivores. That led to a closer examination of the new tires. :unsure: Ordered 32x10x15. They got the 10 part of the order right, and had the correct size listed on the receipt. 30x10x14 just aint gonna work. :LOL: Called them right away and told them what had happened. They said they would try and locate the right tires and will get back to me. I still haven't heard anything back. I hope this doesn't escalate into a much larger problem. Good thing these are a "want", and not a "need".
213


214


215


216
 
#11 ·
So my good deal is being returned for a refund. Apparently the 32-10-15's are on back order, with no time table for them to become available. Their best "guess" was late June. Thanks but no thanks. They already took my money for a product they didn't have, and now want to just hold onto my money indefinitely. I don't play that game. Guess my search will continue for my next "best" tire. LOL
 
#13 ·
Bummer those BFG's look awesome. My last tire was the Sedona Rock-a-billy. They somewhat resembeled the old BFG Krawler tires that used to be around. Did outstanding in Moab and I was running 6 psi with regular wheels. When they were first revealed, the reps were running 2-3 psi and not loosing beads from what I was told. Definately worth a look. I have one mounted on a 15' spare if you want to check it out some day. Good luck.
 
#14 ·
I did really like the looks of the KM3's. The one thing I wasn't wild about was the actual tread (contact patch) measured 9" across, not 10 like you would expect from a 10" tire. Other than that I was really looking forward to trying them out. Not a big deal since they were an impulse buy when I stumbled across the sale, and I only have 209 miles on my Carnivores. I will probably start looking again so if something happens to one of these rare, stupidly expensive 31" Canivores I will have a replacement set of 32's on stand by. :)
 
#15 ·
That was a short hunt. Got a tip from the RZR forum on where to possibly locate my 32" KM3's. Called 'em up and found them for just $11 more per tire than my previous deal. We'll see if I actually get the right size delivered this time. 😄
ProUTVParts.com
 
#25 ·
Look great Bob! Make sure you check the beadlock bolts on those after your first ride. I had those on my previous machine and the first time I ran them was Hells Revenge. Got back to the trailer and was missing a bolt and 3-5 on each ring were backed out a bunch. IIRC, the torque specs on those are fairly low, something like max of 18-20 ft lbs.
 
#29 ·
I've heard all different sizes for the OEM wheels. I believe they are a 6+2 offset, but honestly don't know. They definitely are NOT 4+3. lol The new wheels are 5+2, so it should be close to factory width, but I bet it's a bit wider. Aftermarket wheels seem to always measure a little different, even with the same claimed offsets.
Tusk recommends rechecking the torque every 50 miles for the first 200 miles. Torque is low at only 20 lbs, so I will likely check them even more often at first. I have to stop and pick up some anti-seize on my way home from work before I can torque anything down. Everything is just finger tight for now.
 
#30 ·
I have those wheels on my T4. I have swapped tire 3 times. Never had an issue with beads or wheels. I use a Log splitter to break inside bead easy and mount my tires. Tip alert!! I do torque em properly in 3 stages with tq wrench. Curious what the weight is compared to the stock combo???
 
#33 ·
Finished mounting the tires last night. Not a job I would like to do full time.... Took about 45 minutes each to lube the bolts (anti seize), get them properly torqued down and up to the garage to air them up and seat the rear bead. I've heard the bead area on these BFG's is a little thicker than most tires, so maybe that contributed to the amount of time it took to torque them down. PITA! However, they're done!
I don't know yet what the OEM tire/wheel combo weighs, but my new tire/wheel weighs 64 lbs each, according to my bathroom scale. Seems a little off since the tire weight is 43 lbs, and the wheels are listed at 17 lbs. That would total 60 lbs. Regardless, the weight difference is what I'm looking for, and I will know that when I start swapping them out. Maybe tonight...

349


350
 
Top