Kawasaki KRX Forum banner

1 - 19 of 19 Posts

·
Registered
Joined
·
15 Posts
Discussion Starter #5
FYI. When you order the Rugged Radios "KRX Package", this is the fitment for the radio. The photos they show makes it appear to be flush against the mount. It is not.


545
 

·
Registered
Joined
·
10 Posts
here's mine - I tried to use one of those plastic ones that fit inside the cutout - but you will need to cut out the rear of the storage compartment if you do......I ran my headsets to the rear to keep the cords behind our shoulders - i dont like things in my way:) works well - ive taken it off 5 times to add accessories - still works fine.
 

Attachments

·
Registered
Joined
·
10 Posts
FYI. When you order the Rugged Radios "KRX Package", this is the fitment for the radio. The photos they show makes it appear to be flush against the mount. It is not.


View attachment 545
mine fits quite a bit deeper then that - but its last years radio.......i would call them or file that so its more open........can you go the other direction with it ? from inside going out?
 

·
Registered
Joined
·
15 Posts
Discussion Starter #9
here's mine - I tried to use one of those plastic ones that fit inside the cutout - but you will need to cut out the rear of the storage compartment if you do......I ran my headsets to the rear to keep the cords behind our shoulders - i dont like things in my way:) works well - ive taken it off 5 times to add accessories - still works fine.
Thanks for posting the pics! Did you get a recall on the Kawasaki harness system? Wondering what they determined the problem to be.
 

·
Registered
Joined
·
10 Posts
Thanks for posting the pics! Did you get a recall on the Kawasaki harness system? Wondering what they determined the problem to be.
I didnt get a recall notice - these are about 6 weeks old - when did you get a notice? - I prob need to dig into that - thnx......
 

·
Registered
Joined
·
15 Posts
Discussion Starter #11
No worries. I just ordered one and then got a notice that the dealer could not sell them due to a recall. They did not elaborate on what the issue is.
 

·
Registered
Joined
·
184 Posts
Finally received the rugged com set after waiting near 2 months for it and they wanted it back the day I picked it up for a update.. but wanted to see what channels they took away, what if any issue I could spot and get the mount straightened out first.. This new radio does not fit very good in the hole they claim its suppose to.. Im told that the update has to do with having two different presets on A and B and switching between.. that part seems to work but did notice the auto search when on A will pick up incoming calls from B .. if that makes any sense.. Now with channel presets that Rugged is taking away in an attempt to police us...we may have to go back to figuring out what number to dial in to get a clear channel.. PCI may have been a better choice..
 

·
Registered
2020 white KRX 1000
Joined
·
81 Posts
I’m in the same boat. I ordered my system, waited two months to receive the radio, the still didn’t ship the antenna. After all that, the sheet metal mount looks like crap and radio doesn’t fit it. I’m going to return my system. Rugged Radios really let me down on this experience. I was so excited too.
 

·
Registered
Joined
·
15 Posts
Discussion Starter #14
Finished the Rugged Install. I was going to return the system as well but everything was out of the box, the antenna had already been installed, and the mount was already ground down to actually fit.
580
 

·
Premium Member
Joined
·
18 Posts
My KRX has 90 miles, waiting on my head sets, antenna and cable before use. FYI studying for my HAM Tech. license.
 

·
Registered
Joined
·
23 Posts
771

had to cut the back out of that storage box but I didn’t care. Both sit flush and are locked in. Ran the connectors for headsets to the console between riders and mounted with a billet plate there. Use the dummy plugs when not riding to keep moisture out. Using ultimate carbon headsets and wondering if I should have done the alpha bass.
 

·
Premium Member
Joined
·
18 Posts
Still waiting on my antenna cord extension and head sets, for my Rugged Radio and Com. On a positive note I passed by Ham Technician test yesterday, now studying for my General License.
 
1 - 19 of 19 Posts
Top