Kawasaki KRX Forum banner
1 - 3 of 3 Posts

·
Registered
2021 Blue
Joined
·
90 Posts
Discussion Starter · #1 · (Edited)
I removed my SuperATV hitch receiver to mount the Kawasaki rear bumper. It was a chore because the two upper bolts on the receiver also hold what I think are called the rear control arms in place. Those bolts come in from the rear of the machine. I re-installed and re-torqued the same two bolts I took out to mount the receiver. Don't know why, but I'm thinking there were more threads showing when I took them out. Would one of you be kind enough to look at your bolts and see if this is what they look like? Thanks
 

·
Registered
Joined
·
299 Posts
Mine are longer, but I don't remember if mine reused the stock hardware. I have the EMP hitch. Turn the bolts around then you just need to take the nuts off.

My lowers look like yours.
 
1 - 3 of 3 Posts
Top