Kawasaki KRX Forum banner

1 - 12 of 12 Posts

·
Registered
Joined
·
17 Posts
Discussion Starter #3
Needed some lug nuts for the wheel spacers I bought. I found out the answer already. They are 12x1.25.
 

·
Registered
Joined
·
17 Posts
Discussion Starter #5
Yep I’ve already gotten on the list for replacements. For now I’ve cut the stops at an angle.
 

·
Registered
Joined
·
17 Posts
Discussion Starter #7
I was told they are going to email me when the parts are available and then would ship them to me or to the local dealer. I’m just going to change them myself. I’ve got all the tools needed for the job and I don’t wanna have to let it sit at a dealer for weeks to be fixed. As far as warranty goes I’m sure mine was void the moment I installed the snorkel kit.
 

·
Registered
Joined
·
10 Posts
Before installing spacers make sure the ones you have are correct . The krx wheels are hub centric not lug. I purchased a set from venom and after a useless phone call to manufacturer i ended up modifying and fixing it myself.
 

·
Registered
Joined
·
17 Posts
Discussion Starter #9
Before installing spacers make sure the ones you have are correct . The krx wheels are hub centric not lug. I purchased a set from venom and after a useless phone call to manufacturer i ended up modifying and fixing it myself.
yeah I got the venom ones also. Mine where good as far as hub centric goes. The wheel studs are 12x1.50 instead of 12x1.25 like the KRX though.
 

·
Registered
Joined
·
17 Posts
Discussion Starter #11
Should be 12x1.25. Sounds like you got a Polaris wheel spacer which those are 12x1.5 and the same bolt pattern.
Yeah probably right. Luckily the hub measurement was correct. If not I’d of had to return them. I just ordered some open ended acorn lugs that are 12x1.25 for the spacers and went to Fastenal for the 12x1.50 flange style nuts to attach the factory wheel to the spacer.
 

·
Registered
Joined
·
30 Posts
Yeah probably right. Luckily the hub measurement was correct. If not I’d of had to return them. I just ordered some open ended acorn lugs that are 12x1.25 for the spacers and went to Fastenal for the 12x1.50 flange style nuts to attach the factory wheel to the spacer.
Yeah that should fix you up.
 
1 - 12 of 12 Posts
Top