Kawasaki KRX Forum banner
1 - 2 of 2 Posts

· Registered
2021 KRX 1000
Joined
·
49 Posts
Discussion Starter · #1 ·
Well, after installing my new BCF cage, I found that I no longer had enough headroom to keep my noggin from bumping the aluminum roof. I installed a Kirkey racing seat, which is plenty low enough by leaves much to be desired in comfort.

Has anyone had any success in either lowering the factory seat or finds an aftermarket seat with a lower seat base/more layback or both?
 

· Registered
Joined
·
13 Posts
Well, after installing my new BCF cage, I found that I no longer had enough headroom to keep my noggin from bumping the aluminum roof. I installed a Kirkey racing seat, which is plenty low enough by leaves much to be desired in comfort.

Has anyone had any success in either lowering the factory seat or finds an aftermarket seat with a lower seat base/more layback or both?
How tall is your machine with this cage? I need a lower one that will fit in my enclosed trailer. I need to get down to 73-74 inches
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top