Kawasaki KRX Forum banner

1 - 9 of 9 Posts

·
Vendor
Joined
·
56 Posts
Discussion Starter #1
KAWASAKI TERYX KRX 1000 FULL SKID PLATE BY SUPERATV

Start a conversation for your best deal or order online:


Free Shipping in the Lower 48 States

DETAILS
SKU: FSP-K-TRX

A Tougher Skid Plate
Do you trust the plastic and metal stock skid plate to protect your KRX 1000? You shouldn’t—hard hits can break welds and bend metal so that it rubs and damages brake lines, prop shafts, or wiring. With SuperATV’s 1/2” ARMW Full Skid Plate installed on your Kawasaki Teryx KRX, you’ll have full front to back protection from big rocks and gnarly trails.

Made of Proprietary ARMW
SuperATV’s skid plates lead the industry in strength, durability, and innovation. SuperATV utilizes 1/2” thick ARMW for each piece of the Defender skid plate. ARMW is a proprietary UHMW blend that has ultra-high abrasion resistance, unmatched impact strength, and ridiculously low wear characteristics. Instead of banging and screeching over every rock, ARMW is quiet and smooth and won’t get bent out of shape.

Creates a Perfectly Smooth Surface
We use countersunk bolts to ensure that you get the smoothest skid plates possible. These bolts are flush with the skid plate so you can slide over rocks and stumps without hitting your bolts. That makes bottom-out scenarios smoother and prevents damage to your skid plate.

Perfect Fit
We know skid plates are more difficult than your average part to install. That’s why we laser scan the KRX before we design our skid plate. Along with CNC cutting and bending, that gives you a perfect, smooth fit and an easy installation.

California Proposition 65 Warning
WARNING: This product may contain a chemical known to the State of California to cause cancer or birth defects or other reproductive harm.

FITMENT
  • Kawasaki Teryx KRX 1000 : 2020+
FEATURES
  • Uses abrasion and break resistant 1/2” proprietary ARMW material
  • Bolts fit flush to skid plate for smooth surface
  • Full front to back protection
  • Laser scanned and CNC cut for a perfect fit
  • Drain ports make cleanup easy
827
 

·
Registered
2020 Green KRX
Joined
·
302 Posts
Not sure why you would need these all if not most KRXs come stock with skid plates.
 

·
Registered
Joined
·
173 Posts
Krx definitely needs a skid plate if you plan on using it off road.. The thin sheet metal underside adds sheer and will get bent up easily..The stock accessory skid at $400 does not cover the foot wells and so soft it shreds when you slide over or catch anything. Thankfully there are better options out there!
But for those who don't mind their underside and frame members bent up like hamburger a skid is the least of their worries!
 

·
Vendor
Joined
·
56 Posts
Discussion Starter #4
A quality skid plate is the first item I put on all my machines. It saves the machine from damage and adds resale value when you move on to another machine.
 

·
Registered
Joined
·
17 Posts
That's a good looking product. I haven't picked up my new KRX yet, it's being put together at the dealership. I put the Tusk 3/8" uhmw on it. I'd have considered that one when buying if I had seen it.
 
1 - 9 of 9 Posts
Top