[DirtDiver28]

I only have 20 hours on the bike. So far it has been good. Was planning on a night ride got in put it in reverse it made a pretty loud whining noise. Put her in drive and wouldn't go anywhere. It wasn't the belt everything looked fine. Has anyone had an issue like that?

 

[Marino]

I did but it was some ice buildup in the clutch and would not allow it to function correctly. this does not seem to be your problem though as you have looked at your belt. also the limiting switch in your seatbelt is just a little metal piece mine broke off. I had to take it apart and make sure the little button inside is pressed in.

 

[DirtDiver28]

1. 
   

2. I did but it was some ice buildup in the clutch and would not allow it to function correctly. this does not seem to be your problem though as you have looked at your belt. also the limiting switch in your seatbelt is just a little metal piece mine broke off. I had to take it apart and make sure the little button inside is pressed in.

   The clutch was engaging but sounded like the bike was in a bind. Rpms were real low