Kawasaki KRX Forum banner
1 - 6 of 6 Posts

·
Premium Member
2020 KRX
Joined
·
1,356 Posts
The one thing he forgot to mention, the belts ARE directional. There are arrows on them, pay attention when removing your old one so you see which way the arrows are pointing, and install the new one in the same way.
 

·
Registered
Joined
·
34 Posts
The one thing he forgot to mention, the belts ARE directional. There are arrows on them, pay attention when removing your old one so you see which way the arrows are pointing, and install the new one in the same way.
Were we suppose to get the “spreader bolt” when the unit was purchased or do we need to get one from the hardware store. Whats the specs on the bolt?
 

·
Super Moderator
2020 Kawasaki KRX
Joined
·
2,067 Posts
Discussion Starter · #4 ·

·
Premium Member
2020 KRX
Joined
·
1,356 Posts
Were we suppose to get the “spreader bolt” when the unit was purchased or do we need to get one from the hardware store. Whats the specs on the bolt?
Yeah, it’s a 10 x 1.25 bolt. I just picked up a couple over at Ace and tossed them in my tool bag. Just make sure to get one that’s at least 2 1/2” long.
 
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top