Kawasaki KRX Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
21 Posts
Discussion Starter · #1 ·
Just got a set of all things tenders, instructions are pretty vague on measurements. I’m still on stock 31s for now but eventually will be on 33s. Average amount of accessories (bumpers, sliders 1/2” skids, winch etc). I’m pretty much shooting for just stock height not looking for any major lift. I’m almost maxed out on adjustments on the stock tenders right now.

what are you guys running for measurements on these and where are you measuring at (top of aluminum part to the top lock ring, top of spring etc). And what’s your final ground clearance
 

·
Registered
2021 KRX SE
Joined
·
935 Posts
I measure from the top of round shock tube down to lock ring on front an rear. I am at 3.5 inches down on the fronts an 8 inches on the rear. That gave me 16 front an rear on true 33.5 tires. I measure ride height from bottom of the front a arm tab (just under the bolt) and the rear I measure about straight down in front of the rear axle right before it starts to dove tail up.
 
1 - 2 of 2 Posts
Top